Die casting is the process by which molten metal is pushed into mold cavities at very high pressure. It is ideal as it helps in the mass production of metallic parts that need less post-production machining. Aluminum Die-casting companies produce high-quality metal products which ensure that they last for an extended period. They also produce these products in large quantities to meet the high demand. The metallic products produced also come in various designs, giving you more options to choose from. Aluminum die-casting companies produce products such as drill holes, studs, bosses, and require minimal assembly. In this article, we shall focus on the Aluminum Die Casting Companies in the United States.

Types of die casting:

There are two significant types of die casting processes, namely: hot-chamber and cold-chamber die casting.

Hot-chamber die casting:

This process is also known as hot casting or gooseneck casting. Here, the cylinder cavity of the injection mechanism is submerged in a molten metal bath. Then, the gooseneck metal feed system does draw out the molten metal into the die chamber. As a result, there is a higher rate of part production in the hot-chamber process than the cold-chamber process.

Cold-chamber die casting:

The process is the same as the hot-chamber process, only that it focuses mainly on minimizing machine corrosion instead of production efficiency. The molten metal is automatically or hand-ladled into the injection system, which helps to eliminate the injection mechanism to be submerged in the melted metal bath.

Matters needing attention when choosing aluminum die casting company:

Certain things need attention when choosing aluminum die casting company, as discussed below:

Time- How fast do you need the products. If you need the metal parts as soon as possible, it is advisable to choose a company that produces the products at high speed.

Cost- Is the company producing products at an affordable rate? Choose a company with reasonable rates so that you save some money. However, consider the quality of the products. Do not choose low-quality products just because they are cheap.

Experience- Choose a company with many years of experience. This is because there is a likelihood they are still on the market since they produce high-quality products.

Capabilities-It is always good to choose a company that can handle the mass volume in production cycles. Again, consider a company that adds value to the products, such as plating, powder coating, painting, and assembly.

  1. Kinetic Die Casting Company

The company has been in the die casting industry for more than 25 years. It is located in North Hollywood, California. The company specializes in aluminum die casting and zinc die casting. It has a team of experts who will assist with die-casting aluminum part design, die-cast tooling, aluminum die-casting prototypes, and machining of the die-cast parts.

Products/Service:

Aluminum Die Casting

Address: 6918 Beck Avenue, North Hollywood, California USA 91605

  1. A.L. Johnson Company

A.L. Johnson Company has been in existence since 1954; therefore, it has the vast experience needed to die casting. It is located in Calle Carga, Camarillo. The company provides services to its customers using modern technologies such as telecommunications, biomedical, guidance, computer peripherals, and navigation. This is a one-stop-shop as the company offers services like prototyping, production, machining, and finishing. The company takes orders from as low as ten pieces up to the unlimited maximum.

Products/Service:

Aluminum Die Casting

Address: 4671 Calle Carga,Camarillo, CA 93012

  1. ABCO Diecasters, Inc.

The company has served many customers in North America for more than 30 years. It is located in Tompkins Point Road, Newark. The company’s primary services are zinc die casting and powder coating. It has a team of experts who will take you through product design to the whole of the production process. The company produces display items, architectural hardware, window hardware, automotive lighting, and fuel systems. Its secondary services include tapping, drilling, bending operations, staking, and light assembly.

Products/Service:

Aluminum Die Casting

Address: 39 Tompkins Point Road, Newark, NJ 07114

  1. ABLE DIE CASTING

Are you looking for a company with much experience in die casting? Search no more. ABLE DIE-CASTING Company is an ideal choice for you. The company has been in the die casting industry since 1920. It offers excellent high-pressure die castings to its customers, which is exceptional. The company also provides high-tolerance machining and assembly. In its production process, the company maintains top-quality standards unparalleled by any domestic or international competitor in the die casting industry.

Products/Service:

Aluminum Die Casting

Address: 3907 Wesley Terrace Schiller ark, IL 60176

  1. ADC Manufacturing

ADC Manufacturing is the ideal solution in coating, stamping, and casting. The company is located in North Industrial Park Road, Harrison, Arkansas. It has vast experience in engineering and manufacturing of products for over four decades. The company provides its customers with exceptional services at affordable pricing. It offers Aluminum, galvanized, and powder coating fittings and accessories. The primary services offered by the ADC Manufacturing include die casting, precision metal stamping, powder casting, and packaging integration.

Products/Service:

Aluminum Die Casting

Address: 300 North Industrial Park Road, Harrison, Arkansas 72601

  1. Advanced Special Tools, Inc.

Advanced Special Tools Inc. has been in the die casting industry for over 20 years offering exceptional services. It is located on Clark Road,Battle Creek. The company is one of the leading suppliers of manufacturing tooling and injected molded plastic components. It has the capacity and expertise to assist you with precision tooling design and production of the tools themselves. Your products will be ready in a few weeks after placing your order.

Products/Service:

Aluminum Die Casting

Address: 320 Clark Road,Battle Creek, MI 49037

  1. American Aluminum Casting Company

The company is located in Irvington, NJ, and it has over 80 years of experience in die casting. It provides high-quality cast Aluminum parts and commercial non-ferrous castings to various industries. The company uses three distinct metal casting processes, which include die-casting, pattern shop, sand casting, and permanent mold casting, thus, ensuring it meets all the customers’ needs.

Products/Service:

Aluminum Die Casting

Address: 324 Coit Street, Irvington, NJ 0711

  1. Ansun Protective Metals.Inc.

The company was incorporated since 1988. It is located in Lincoln Blvd. Middlesex, NJ. The company provides various Aluminum and zinc casting services to many industries. The in-house services of the company include continuous casting, rolling, and full-service machining. They also specialize in custom alloys and custom shapes. The company provides its customers with superior products within a short period at a reasonable cost.

Products/Service:

Aluminum Die Casting

Address: 130 Lincoln Blvd. Middlesex, NJ 08846

  1. Apex Aluminum Die Casting Company

Apex Aluminum Die Casting Company is ISO 9001: 2015 Certified, and it is a member of the Eagle Registration Inc. and also a corporate member of the North American Die Casting Association. With that in mind, you are guaranteed of high-quality products for the price that you pay. The company’s primary services include mold design and manufacturing, Aluminum die-casting, cast finishing using state-of-the-art CNC machining, and storage facility for stocking programs.

Products/Service:

Aluminum Die Casting

Address: From Interstate 75 take Exit #83 for County Road 25A. Go West on Country Road 25A. Turn Right on Sherry Drive. Apex is at the end of the road.

  1. Atlantic Casting and Engineering Corporation

Atlantic Casting and Engineering Corporation have been in existence for over 75 years. It has vast experience in die casting with highly-skilled personnel. The company is located in Bloomfield Avenue, Clifton, NJ, United States. It has ISO 9001 and AS 9100 Quality Services Certifications. The company has won numerous awards, such as the Aerospace Award and Military/Defense Award. It produces high-quality and geometrically complex parts in the aerospace market.

Products/Service:

Aluminum Die Casting

Address: 810 Bloomfield Avenue, Clifton, New Jersey 07012-0416

  1. Bardane Inc.

The company was founded in 1968, and it has been providing its customers with high-quality products. It is located in Delaware Street, Jermyn, and it offers services at an affordable price. The company’s main services include Aluminum and zinc die castings. It also offers CNC machining, tapping, drilling, and minor assembly. The company is ISO 9001: 2015 Certified.

Products/Service:

Aluminum Die Casting

Address: 317 Delaware Street, Jermyn, PA 18433

  1. Bedford Machine & Tool, Inc.

Bedford Machine & Tool, Inc. provides products and services to its customers on the stipulated time and meets all the agreed requirements. The company is located in John Williams Blvd, Bedford. The company’s primary services include die-casting tooling, CNC production, large CNC machining, large fabrication, and large part painting. All these are done by a team of high-skilled personnel.

Products/Service:

Aluminum Die Casting

Address: 2103 John Williams Blvd, Bedford, IN 47421

  1. BESTCO INC.

The company has been servicing its customers around the USA since 1967. It is located in Mauzey Ct., Hillsboro, and its main objective is to provide its clients with the highest quality products within the agreed timeline. The company is an ideal solution for dies and molds, ranging from mechanical and hydraulic unscrewing to slides, hot and cold runners, lift cores, and MIM tooling. It has a team with high expertise, which ensures the company mission is accomplished.

Products/Service:

Aluminum Die Casting

Address: 8087 NE Mauzey Ct. Suite 101, Hillsboro, OR 97124

  1. Blue Ridge Pressure Castings

Blue Ridge Pressure Castings is located in the Tenth & Bridge Street, Lehighton. It has a team of experts who provide high-quality products and delivery standards on complex components. The company’s products are durable, high-quality, affordable, and corrosion resistance. The company’s in-house services are prototyping, engineering support, high-pressure die casting, tooling, machining & assembly, and finishing and coating. The company serves various industries such as heavy truck, automotive, engine manufacturers, electronics, and military hardware.

Products/Service:

Aluminum Die Casting

Address: Tenth & Bridge Street, Lehighton, PA 18235

  1. Busch Precision, Inc.

The company has been providing exceptional services since 1907. It has a team of experts who are highly skilled in handling robust maintenance and machining challenges. The company is located in Wisconsin Street, Hartford, Wisconsin. It offers services such as die-cast machine components, precision tooling, machinery repair & maintenance, and machining & manufacturing.

Products/Service:

Aluminum Die Casting

Address: 709 W. Wisconsin Street, Hartford, WI 53027